(video in dutch)
The HomeWizard Watermeter works with all watermeters with an Itron, Elster of Sensus mount. The adapter is attached on top of your existing analog-meter, the Watermeter then clicks into the adapter to measure the liter rotary wheel. Your analog meter may look slightly different to the watermeters presented.
Installing the adapter
Install the transparant adapter in the box on your existing watermeter. Depending on your watermeter brand or mounting type, you use one or two of the 5 included screws for installation
Please note
for the Itron meter the screw hole needs to be opened in some cases by breaking away or unscrewing a piece of plastic.
for the Sensus meter the inner part with the screws can contra rotate with the outer shell. this may be required to fit the adapter.
Powering the Watermeter
The Watermeter can be powered with the included 3 meters USB-C cable for live data. If there is no outlet available you can use 2 CR123A batteries (separately available) for 1 year of every 6 hours historical data.
Note: After powering the Watermeter, keep the Watermeter sensor away from metal objects such as rings or the screws as this may interfere with its calibration. You can recalibrate the Watermeter from the app after installation if your Watermeter does not read correctly. Settings > meters > Watermeter > options ••• > recalibrate sensors
Placing the Watermeter
You can now click the Watermeter on the adapter so that it reads the liter rotary wheel. The installation is now done. When required you can easily detach the Watermeter from the bracket to check your meterreadings. You can now follow the steps in the app to connect the Watermeter.
Download the Energy app
Search for "HomeWizard Energy" in the App- or Playstore, or click the links below to download the correct app for your device.
HomeWizard Energy
Click to download
Follow the steps in the app, or read below.
Create HomeWizard online account
Open the HomeWizard Energy app, tap Next to start the installation proces.
Enter your e-mail address and press Next
Tap Create account or enter your HomeWizard account Password
Enter a name for your 'Home'
Set the location for your 'Home'. You will be asked to grant permission to use your location. This data will only be saved once to authorise the installation and for the Wi-Fi setup of the Watermeter (reading Wi-Fi data requires location acces).
App setup is now completed
Adding the Watermeter
Press Add a device > Watermeter > Begin setup
Ensure that your Watermeter is still blinking blue (pairing mode)
iOS 13+ /Android 10+: You will automatically be prompted to connect the the 'WatermeterSetup' network. Confirm and continue to Select your Wi-Fi below.
Android 9 or lower:
1. Go to the Wi-Fi settings on your phone and connect to the Wi-Fi network: WatermeterSetup
2. Enter the password: SetupPass
3. Go back to the Energy app after succesfully connecting to the network. You might see ''No internet connection available''. This can be ignored, as you have now connected your phone to the Wi-Fi network of the Watermeter, which currently has no internet.
Select your Wi-Fi
Select your Wi-Fi network from the list and enter your Wi-Fi password. Press continue. The Watermeter will now connect to your Wi-Fi network.
When successful the Watermeter status will turn green for a few seconds and then turn off, you will be guided to the App home screen.
Troubleshooting